Hi, The problem is a mix of BSOD's and freezes. I only noticed the error message on the BSOD a couple of times, which was "page fault in non-paged area" with a reference to the file win32k.sys. It then started a memory dump and rebooted on...
Hi,
The problem is a mix of BSOD's and freezes. I only noticed the error message on the BSOD a couple of times, which was "page fault in non-paged area" with a reference to the file win32k.sys. It then started a memory dump and rebooted on completion. Attached is the minidump file and a txt document with the error codes.
The machine is new (I built it last September - specs below), with Vista 64-bit SP1. It had been running absolutely fine since a week ago when I swapped my old Seagate hard drive out and put in the 2 current drives, and installed them in RAID 0. Initially I thought that it was the RAID config or drivers, and have since done several reinstalls. However same probs kept occurring. I was also worried that my system might be underpowered and that the 2nd hd was just slightly too much: I've consequently also reinstalled everything on one of the 2 hard drives and disconnected the other, as it is now, but still the same problems. I can't help feeling that it's hardware-related, and am on the verge of buying a higher-powered PSU.
I've run Memtest86 a couple of times to 300% + coverage, no errors. Have Kaspersky Internet Security 2009 installed, fully updated and nothing detected just now after a full scan.
Hope you can help! Am desperately trying to do my work on this machine!
Thanks.
Specs: Asus P5Q motherboard, Intel C2D E7200 (stock), Geil Black Dragon 2GB 1066MHz dual channel, Powercolor HD4850 PCS+ 512Mb, 2x 320GB Seagate 7200.11 (currently 1x), DVDRW, Corsair VX450W, several fans...
Attached Files
Minidumps.zip (17.9 KB)
Linear Mode
